Position and angle
Mounting elevation and off-centre orientation are developed to circulate the usable volume and avoid stagnant zones.
Large-volume circulation
Side-Entry Agitator Mixing Tank
A side-mounted agitation system for circulation and homogenisation in larger tanks handling low- to medium-viscosity liquids.
Quick answer
What this equipment is designed to do.
A side-entry agitator mixing tank introduces flow from the vessel wall to circulate and homogenise larger liquid volumes. Off-centre positioning can support a three-dimensional flow pattern while reducing the need for a long top-entry shaft.
Side entry is frequently evaluated for storage and buffer tanks where continuous or intermittent circulation is needed. Mixer elevation, horizontal angle, liquid level and tank geometry determine whether the flow reaches the full working volume.
Vessentra reviews the circulation objective, nozzle layout, wall reinforcement, seal access and maintenance clearance together. Multiple side-entry mixers may be evaluated for very large or geometrically challenging duties.
Typical applications
Where this vessel fits.
Application details are reviewed before equipment configuration is finalised.
- 01Beverage storage
- 02Dairy liquid holding
- 03Edible oil circulation
- 04Low-viscosity ingredient tanks
- 05Large buffer vessels
- 06Uniformity maintenance
Engineering configuration
Configured around your duty.
The equipment is developed from process inputs, operating conditions, cleaning requirements and site interfaces.
Flow objective
Impeller, speed and power are selected from viscosity, tank diameter, liquid level and required turnover.
Wall integration
Mounting nozzle, reinforcement and local vessel loads are coordinated with the tank mechanical design.
Seal and access
Seal arrangement, isolation strategy and external service clearance are reviewed for safe maintenance.
Specification guidance
Define the operating basis before fabrication.
Project limits are confirmed through engineering review. These fields describe the decisions needed for an accurate, application-specific configuration.
| Mounting | Side-entry, project-positioned |
|---|---|
| Typical duty | Circulation and homogenisation |
| Product range | Low- to medium-viscosity liquids |
| Impeller | Flow-oriented project selection |
| Speed control | Fixed or variable speed |
| Seal arrangement | Selected for product and operating state |
| Vessel reinforcement | Designed for mixer loads |
| Maintenance access | Coordinated with site clearance |
Common questions
Answers for project planning.
When should a side-entry agitator be considered?
It is commonly evaluated for larger tanks that need circulation or uniformity maintenance in low- to medium-viscosity liquids.
Why is the agitator installed off centre?
An angled or off-centre flow can create broader circulation and reduce simple rotational flow, but the exact position must be selected for the vessel geometry.
Can one side-entry mixer circulate the whole tank?
It depends on tank size, aspect ratio, liquid level, viscosity and turnover target. Some duties may require multiple mixers or a different arrangement.
What maintenance access is required?
Space is needed around the drive and seal, and the isolation or tank-emptying strategy must be defined before the installation layout is finalised.
Talk to engineering
Start with the process requirement.
Share the product, working volume, operating conditions, cleaning method and project location. We will use them to structure the next engineering conversation.